Approx. Rs 110 / UnitGet Latest Price
Product Details:
Voltage | 12 V to 220 V DC |
Material | Mild Steel |
Brand | Vaishno |
Usage/Application | Industrial |
Frequency Range | 50/60 Hz |
Sound Level | From 90 db to 110 db |
Surface Finishing | Polish |
Audio Range | 50 meters |
IP Rating | IP55 |
Packing Type | Box |
Approx. Rs 180 / UnitGet Latest Price
Product Details:
Material/Body | Mild Steel |
Packaging Type | Box |
Phase | Single |
Input current | 6 - 10 Amp |
Operating Voltage | 220 V |
Terminal temperature | Max.30 deg C (for 10000 cycles) |
Insulation resistance | Min 100 M Ohm |
Is It Flameproof | Flameproof |
Approx. Rs 110 / UnitGet Latest Price
Product Details:
Brand | Vaishno |
Operating Frequency | 2500 operation per hour |
Rated Insulation Voltage | 500V AC |
Degree Of Protection | IP 65,IP 67 |
Thermal Current | 10A |
AC-15 Rating | 6A 110V,3A 220V,1.5 415V,1.1A at 550V |
DC 13 Rating | 2.2 110V,1.1A 220V |
Mechanical Life | 1,00,00,000 Operations |
Electrical Life | 1,00,000 operations on Load |
Enclosure | Cast Aluminium |
Terminal Capacity | 2.5sq mm |
*Your information is safe with us.
Approx. Rs 245 / UnitGet Latest Price
Product Details:
Material | Stainless Steel |
Accuracy | Class 1 or 0.5 |
Packaging Type | Box |
Current | 1-5 A |
Thickness | 1-5 mm |
Working Temperature | -20 + 60 Deg C |
DC Shunts are available for current ratings from 5A to 15000A with mV drops of 50-150 mV. DC Shunts are manufactured with Stringent Quality Control confirming to IS: 1248. Shunts consist of manganin rods/wire soldered or silver brazed to Brass/ Copper Blocks. The shunts are artificially aged after manufacturing, then tested on full load.
Applications:
Shunts are used for measuring current in DC Applications by connecting them to Moving Coil Panel meters, Digital Meters or other measuring devices. Shunts can also be used in Control Devices such as Power Supplies and Battery chargers or for over Load Protection.
Types:-
Compact Brass Ended- These shunts are often requested for special applications due to small size. Manufactured to IEC: 51 Class-1, they can be current rated from 5-50A with 25, 50, 60, 75, and 100mV output.
Standard Brass Ended- These Shunts are heavy duty type and provide accurate DC mili Volt signal suitable for measuring instruments and circuits and are manufactured as per IS: 1248, Class-1 or Class 0.5 with current rating from 5A- 15000A and 50- 300mV output.
Installation- For maximum heat dissipation, mount shunts in the horizontal manner, with the blade, standing vertical. Utilize the full end block surface area. Ample ventilation should be provided. Bus Bar should be adequately rated, clean and level, with a thin coat of silicon grease applied to the contact surface area. Use flat and tension washers under the nuts and tighten fully.
Approx. Rs 65 / PieceGet Latest Price
Product Details:
Brand | Vaishno |
Body Material | ABS Plastic |
Voltage | 12V AC/DC to 220V AC/DC |
Packaging Type | Box |
Phase | Single |
Frequency | 50 Hz |
Suitable For | 6.5mm, 8.5mm, 9.5mm, 12.5mm, 14.5mm, 16.5mm, 19.5mm, 22.5mm, 25.5mm, and 30.5mm. |
Housing Material | Brass |
Tested | IS/IEC- 60947/IEC 60947-5-1 |
Approx. Rs 180 / UnitGet Latest Price
Product Details:
Usage/Application | Industrial |
Current Rating | 10 A |
Packaging Type | Box |
Phase | Single |
Voltage | 240 V |
5.0/5
Rated by 2 Users